how to ground a lightswitch

Are you tired of looking at your old, outdated lightswitch, but dreading the thought of having to rewire the entire thing? If so, you’re in luck! Grounding a lightswitch is a relatively simple process that can be done in no time.

Not only is grounding a lightswitch a great way to give your home a much-needed facelift, but it’s also an important safety measure. By grounding your lightswitch, you’ll be protecting yourself and your family from electrical dangers. Here’s how to do it:

Step 1: Turn off the power
Before you begin, make sure to turn off the power to the switch at the circuit breaker. Do not attempt to complete this job without doing this first step!

Step 2: Remove the cover plate and screws
Using a screwdriver, remove the cover plate and screws from the switch. Take care not to break anything in the process.

Step 3: Connect the ground wire
The ground wire should be connected to the metal box by either a green or bare copper wire. If the metal box is not already grounded, then you will need to run a ground wire from the metal box to the switch.

Step 4: Secure the ground wire with a grounding screw
Once you have connected the ground wire, secure it with a grounding screw. Make sure the screw makes full contact with the box or wire.

Step 5: Reattach the cover plate
Finally, reattach the cover plate to the switch and secure it with the screws. Make sure everything is tight and secure.

And that’s it! You have successfully grounded your lightswitch. Now you can enjoy the peace of mind of knowing that your home is a safe and secure place for your family.